Iscsi Enable; Iscsi Priority-Bits - Dell Force10 S4810P Reference Manual

Usage By default, iSCSI flows are assigned to dot1p priority 4. Dell Force10 recommends changing the
Information dot1p priority-queue setting to 0 (zero).

iscsi enable

Globally enable iSCSI optimization.
S4810
Syntax iscsi enable
To disable iSCSI optimization, use the no iscsi command.
Parameters
enable
Defaults Enabled.
Command Modes CONFIGURATION
Command History
Version 8.3.12.0
Version 8.3.16.0

iscsi priority-bits

Configure the priority bitmap that advertises in the iSCSI application TLVs.
S4810
Syntax iscsi priority-bits
To remove the configured priority bitmap, use the no iscsi priority-bits command.
Defaults 4 (0x10 in the bitmap)
Command Modes PROTOCOL LLDP (only on the global, not on the interface)
Command History
Version 8.3.12.0
Version 8.3.16.0
Enter the keyword enable to enable the iSCSI optimization feature.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
961