Sflow Polling-Interval (Interface); Sflow Sample-Rate (Global) - Dell Force10 S4810P Reference Manual

sflow polling-interval (Interface)

Set the sFlow polling interval at an interface (overrides the global-level setting.)
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax sflow polling-interval interval value
To return to the default, use the no sflow polling-interval interval command.
Parameters
interval value
Defaults The same value as the current global default counter polling interval.
Command Modes INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Usage This command sets the counter polling interval for an interface.
Information
Related sflow polling-interval (Global)
Commands

sflow sample-rate (Global)

Change the global default sampling rate.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax sflow sample-rate value
To return to the default sampling rate, use the no sflow sample-rate command.
Parameters
value
1474
Enter the interval value in seconds. The range is 15 to 86400 seconds.
The default is the global counter polling interval.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– globally sets the polling interval.
Enter the sampling rate value. For the C-Series and S-Series, the
range is 256 to 8388608 packets. For the E-Series TeraScale and
ExaScale, the range is 2 to 8388608. Enter values in powers of 2 only;
for example, 4096, 8192, 16384, etc. The default is 32768 packets.