Isis Hello-Interval - Dell Force10 S4810P Reference Manual

Parameters
seconds
level-1
level-2
Defaults seconds = 10; level-1 (if not otherwise specified)
Command Modes INTERFACE
Command History
Version 8.3.12.0
Usage
The default values of this command are typically satisfactory transmission times for a specific
Information
interface on a designated intermediate system. To maintain database synchronization, the
designated routers send CSNPs.
You can configure Level 1 and Level 2 CSNP intervals independently.

isis hello-interval

Specify the length of time between hello packets sent.
E-Series, S4810
Syntax isis hello-interval seconds [level-1 | level-2]
To return to the default values, use the no isis hello-interval [seconds]
[level-1 | level-2] command.
Parameters
seconds
level-1
level-2
Defaults seconds = 10; level-1 (if not otherwise specified)
Command Modes INTERFACE
Command History
Version 8.3.12.0
988
Interval of transmission time between CSNPs on multi-access
networks for the designated intermediate system. The range is 0 to
65535. The default is 10.
(OPTIONAL) Independently configures the interval of time between
transmission of CSNPs for Level 1.
(OPTIONAL) Independently configures the interval of time between
transmission of CSNPs for Level 2.
Introduced on the S4810.
Allows you to set the length of time between hello packet
transmissions. The range is 1 to 65535. The default is 10.
(OPTIONAL) Select this value to configure the hello interval for Level
1. This value is the default.
(OPTIONAL) Select this value to configure the hello interval for Level
2.
Introduced on the S4810.