Ip Msdp Shutdown; Ip Multicast-Msdp - Dell Force10 S4810P Reference Manual

Version 8.3.7.0
Version 7.5.1.0
Usage FTOS counts the SA messages originated by itself and those received from the MSDP peers.
Information When the total SA messages reach this limit, the subsequent SA messages are dropped (even
if they pass RPF checking and policy checking).
If the total number of SA messages is already larger than the limit when this command is
applied, those SA messages that are already in FTOS continue to be accepted. To enforce the
limit in such situation, use the clear ip msdp sa-cache command.
Related
ip msdp peer
Commands
clear ip msdp peer
show ip msdp

ip msdp shutdown

Administratively shut down a configured MSDP peer.
E-Series, Z-Series, S4810
Syntax ip msdp shutdown {peer address}
Parameters
peer address
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 6.2.1.1

ip multicast-msdp

Enable MSDP.
E-Series, Z-Series, S4810
Syntax ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
1096
Introduced on the S4810.
Introduced on the E-Series.
– configures the MSDP peer.
– clears the MSDP peer.
– displays the MSDP information
Enter the peer address in a dotted decimal format (A.B.C.D.).
Introduced on the Z9000.
Introduced on the S4810.
Introduced