clear ip rip
Update all the RIP routes in the FTOS routing table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear ip rip
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Usage
This command triggers updates of the main RIP routing tables.
Information
debug ip rip
Examine RIP routing information for troubleshooting.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip rip [interface | database | events [interface] |
packet [interface] | trigger]
To turn off debugging output, use the no debug ip rip command.
Parameters
interface
1354
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter the interface type and ID as one of the following:
•
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
•
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
•
For a SONET interface, enter the keyword sonet followed by
the slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.