Dell Force10 S4810P Reference Manual page 1124

summary
Command Modes
Command History
Version 8.4.1.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Example (Static)
FTOS#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change:
00:00:23
Example
FTOS#show ip mroute snooping
(Snooping)
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
(*, 225.1.2.1), uptime 00:04:16
(165.87.1.7, 225.1.2.1), uptime 00:03:17
Usage The following describes the show ip mroute command shown in the Example below.
Information
Field
(S, G)
uptime
1124
(OPTIONAL) Enter the keyword summary to view routes in a tabular
format.
• EXEC
• EXEC Privilege
Support for the keyword snooping and the optional vlan vlan-
id, group-address, and source-address parameters were
added on E-Series ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
GigabitEthernet 4/20
Description
Displays the forwarding entry in the multicast route table.
Displays the amount of time the entry has been in the multicast
forwarding table.