Threshold - Dell Force10 S4810P Reference Manual

For a L2 Input Policy Map pmap_l2, the output must be as
follows,
Linecard|Portpipe|CAM Partition|Available CAM|Estimated CAM|
Status
(Allowed ports)
0
Allowed (2)
0
Exception
1
Allowed (5)
1
Exception
13
Allowed (2)
FTOS#

threshold

Specify the minimum and maximum threshold values for the configured WRED profiles.
E-Series, Z-Series, S4810
Syntax threshold min number max number
To remove the threshold values, use the no threshold min number max number
command.
Parameters
min
max
Defaults none
Command Modes CONFIGURATION (config-wred)
Command History
Version 8.3.11.1
Version 8.3.8.0
pre-Version
6.1.1.1
Usage Use this command to configure the minimum and maximum threshold values for user-defined
Information profiles. Additionally, use this command to modify the minimum and maximum threshold values
for the pre-defined WRED profiles. If you delete the threshold values of the pre-defined WRED
profiles, the profiles revert to their original default values.
1348
| |
0
1
0
1
1
number Enter the keyword min followed by the minimum threshold number
for the WRED profile. The range is 1024 to 77824 KB.
number
Enter the keyword max followed by the maximum threshold number
for the WRED profile. The range is 1024 to 77824 KB.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
|
L2ACL 500
L2ACL 100
L2ACL 1000
L2ACL 0
...
...
...
L2ACL 400
|per Port |
200
200
200
200
200