show isis hostname
Display IS-IS host names configured or learned on the E-Series.
E-Series, S4810
Syntax
show isis hostname
Command Modes
Command History
Version 8.3.12.0
Example
FTOS#show isis hostname
System Id
*F100.E120.0013 Force10
FTOS#
show isis interface
Display detailed IS-IS interface status and configuration information.
E-Series, S4810
Syntax
show isis interface [interface]
Parameters
interface
•
EXEC
•
EXEC Privilege
Introduced on the S4810.
Dynamic Name Static Name
(OPTIONAL) Enter the following keywords and slot/port or number
information:
•
•
•
•
•
•
ISIS
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For Loopback interface, enter the keyword loopback
followed by a number from zero (0) to 16383.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For a SONET interface, enter the keyword sonet followed by
the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
1011