Debug Isis Snp-Packets; Debug Isis Spf-Triggers - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

debug isis snp-packets

Enable debugging on a specific interface and provides diagnostic information to debug IS-IS complete sequence

number PDU (CSNP) and partial sequence number PDU (PSNP) packets.

E-Series, S4810

debug isis snp-packets [interface]

To turn off debugging, use the no debug isis snp-packets [interface]

Command Modes

EXEC Privilege

Command History

Version 8.3.12.0

Version 6.3.1.0

Enable debugging on the events that triggered IS-IS shortest path first (SPF) events for debugging purposes.

E-Series, S4810

debug isis spf-triggers

To turn off debugging, use the no debug isis spf-triggers command.

Command Modes

EXEC Privilege

Command History

Version 8.3.12.0

(OPTIONAL) Identifies the interface type slot/port as one of the

For a Gigabit Ethernet interface, enter the keyword

GigabitEthernet followed by the slot/port information.

For a Port Channel interface, enter the keywords port-

channel followed by a number. For the C-Series and S-

Series, the range is 1 to 128. For the E-Series, the range is 1 to

255 for TeraScale and 1 to 512 for ExaScale.

For a SONET interface, enter the keyword sonet followed by

the slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet followed by the slot/port

information.

For a VLAN, enter the keyword vlan followed by a number

from 1 to 4094.

Introduced on the S4810.

Introduced on the S4810.