Show Gvrp - Dell Force10 S4810P Reference Manual

Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Example
FTOS#show garp timers
GARP Timers
----------------------------------------
Join Timer
Leave Timer
LeaveAll Timer
FTOS#
Related garp timers
Commands

show gvrp

Display the GVRP configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show gvrp [brief | interface]
Parameters
brief
interface
720
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
Value (milliseconds)
200
600
10000
– sets the intervals (in milliseconds) for sending GARP messages.
(OPTIONAL) Enter the keyword brief to display a brief summary of
the GVRP configuration.
(OPTIONAL) Enter the following keywords and slot/port or number
information:
•
•
•
•
•
For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/ port information.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.