Clock Timezone - Dell Force10 S4810P Reference Manual

end-day
end-month
end-time
offset
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
pre-Version
6.1.1.0
Related
calendar set
Commands
clock summer-time date
daylight saving time on a one-time basis.
show clock

clock timezone

Configure a timezone for the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-name
offset
1558
Enter the weekday name that you want daylight saving time to end.
Enter the weekdays using the three letter abbreviations; for example
Sun, Sat, Mon etc. The range is Sun to Sat.
Enter the name of one of the 12 months in English.
Enter the time in hours:minutes:seconds. For the hour variable, use
the 24-hour format; example, 17:15:00 is 5:15 pm.
(OPTIONAL) Enter the number of minutes to add during the summer-
time period. The range is 1 to 1440. The default is 60 minutes.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Updated the start-day and end-day options to allow for using
the three-letter abbreviation of the weekday name.
Introduced on the E-Series.
– sets the hardware clock.
– sets a date (and time zone) on which to convert the switch to
– displays the current clock settings.
Enter the name of the timezone. You cannot use spaces.
Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to
universal time coordinated (UTC) for the timezone.