Version 7.5.1.0
pre-Version
6.1.1.0
Example
FTOS#show privilege
Current privilege level is 15
FTOS#
Related
privilege level (CONFIGURATION mode)
Commands
show users
Allows you to view information on all users logged into the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show users [all]
Parameters
all
Command Modes
EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
The following describes the show user command shown in the Example below.
Information
Field
(untitled)
Line
User
Host(s)
Location
Example
FTOS#show user
Line
0 console 0
* 3 vty 1
FTOS#
Introduced on the C-Series.
Introduced on the E-Series.
– assigns access control to different command modes.
(OPTIONAL) Enter the keyword all to view all terminal lines in the
switch.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Indicates with an asterisk (*) which terminal line you are using.
Displays the terminal lines currently in use.
Displays the user name of all users logged in.
Displays the terminal line status.
Displays the IP address of the user.
User
Host(s) Location
admin
idle
admin
idle
172.31.1.4
1421