Protocol Lldp (Configuration); Protocol Lldp (Interface) - Dell Force10 S4810P Reference Manual

Version 7.4.1.0

protocol lldp (Configuration)

Enable the LLDP globally on the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax protocol lldp
To disable LLDP globally on the chassis, use the no protocol lldp command.
Defaults Disabled.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0

protocol lldp (Interface)

Enter the LLDP protocol in INTERFACE mode.
C-Series, E-Series, S-Series, Z-Series
[no] protocol lldp
Syntax
To return to the global LLDP configuration mode, use the no protocol lldp command
from Interface mode.
Defaults LLDP is not enabled on the interface.
Command Modes INTERFACE (conf-if-
Command History
Version 8.3.11.1
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Usage
Before LLDP can be configured on an interface, it must be enabled globally from
Information
CONFIGURATION mode. This command places you in LLDP mode on the interface; it does not
enable the protocol.
When you enter the LLDP protocol in the Interface context, it overrides global configurations.
When you execute the no protocol lldp from INTERFACE mode, interfaces begin to
inherit the configuration from global LLDP CONFIGURATION mode.
Introduced on the E-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
interface -lldp)
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1075