Dell Force10 S4810P Reference Manual page 1267

Parameters
group-address
source-address
Command Modes
Command History
Version 8.3.12.0
Version 7.4.1.0
Example
FTOS#show ipv6 pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P -
Pruned,
Join SPT,
Advertisement
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(25::1, ff0e::225:1:2:1), uptime 00:09:53, expires
00:00:00,flags: CJ
(25::1, ff0e::225:1:2:2), uptime 00:09:54, expires
00:00:00,flags: CJ
(25::2, ff0e::225:1:2:2), uptime 00:09:54, expires
00:00:00,flags: CJ
(25::1, ff0e::226:1:2:1), uptime 00:09:54, expires
00:00:00,flags: CJ
FTOS#
(OPTIONAL) Enter the multicast group address in the x:x:x:x::x format
to view RP mappings for a specific group.
(OPTIONAL) Enter the source address in the x:x:x:x::x format.
• EXEC
• EXEC Privilege
Introduced on the S4810.
Introduced
R - RP-bit set, F - Register flag, T - SPT-bit set, J -
M - MSDP created entry, A - Candidate for MSDP
K - Ack-Pending State
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
NOTE: The :: notation specifies successive hexadecimal fields of
zero.
NOTE: The :: notation specifies successive hexadecimal fields of
zero.
1267