Timers Spf; Timers Throttle Lsa All - Dell Force10 S4810P Reference Manual

timers spf

Set the time interval between when the switch receives a topology change and starts a shortest path first (SPF)
calculation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax timers spf delay holdtime
To return to the default, use the no timers spf command.
Parameters
delay
holdtime
Defaults
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage Setting the
Information alternate path quickly but requires more CPU usage.

timers throttle lsa all

Configure LSA transmit intervals.
Z-Series, S4810
Syntax timers throttle lsa all {start-interval | hold-interval | max-
interval}
To return to the default, use the no timers throttle lsa command.
Parameters
start-interval
1208
Enter a number as the delay. The range is 0 to 4294967295. The default
is 5 seconds.
Enter a number as the hold time. The range is 0 to 4294967295. The
default is 10 seconds.
• delay = 5 seconds
• holdtime = 10 seconds
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
delay and holdtime parameters to a low number enables the switch to switch to an
Set the minimum interval between initial sending and resending the
same LSA. The range is 0 to 600,000 milliseconds.