Dell Force10 S4810P Reference Manual page 898

Field
Rcvd:
0 checksum error...
329 packets...
17 dup...
0 partially...
7 out-of-order...
0 packets with data
after window
0 packets after close
0 window probe
packets...
41 dup ack...
10184 ack...
Sent:
25 control packets...
11603 data packets...
24 data packets
retransmitted
355 ack..
0 window probe...
7 Connections
initiated...
898
Description
Displays the number and types of TCP packets received by the
switch.
• Total = total packets received
• no port = number of packets received with no designated
port
Displays the number of packets received with the following:
• checksum errors
• bad offset to data
• too short
Displays the number of packets and bytes received in sequence.
Displays the number of duplicate packets and bytes received.
Displays the number of partially duplicated packets and bytes
received.
Displays the number of packets and bytes received out of order.
Displays the number of packets and bytes received that exceed the
switch's window size.
Displays the number of packet received after the TCP connection
was closed.
Displays the number of window probe and update packets received.
Displays the number of duplicate acknowledgement packets and
acknowledgement packets with data received.
Displays the number of acknowledgement packets and bytes
received.
Displays the total number of TCP packets sent and the number of
urgent packets sent.
Displays the number of control packets sent and the number
retransmitted.
Displays the number of data packets sent.
Displays the number of data packets resent.
Displays the number of acknowledgement packets sent and the
number of packet delayed.
Displays the number of window probe and update packets sent.
Displays the number of TCP connections initiated, accepted, and
established.