Command History
Version 8.3.11.1
Version 7.6.1.0
Usage
This command displays internal software driver information, which may be useful during
Information
troubleshooting switch initialization errors, such as a downed Port-Pipe.
terminal monitor
Configure the FTOS to display messages on the monitor/terminal.
C-Series, E-Series, S-Series, Z-Series
Syntax
terminal monitor
To return to default settings, use the terminal no monitor command.
defaults
Disabled.
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Related
logging monitor
Commands
Introduced on the Z9000.
Introduced on the S-Series.
•
EXEC
•
EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– sets the logging parameters on the monitor/terminal.
1511