Dell Force10 S4810P Reference Manual page 926

Command Modes
Command History
Version 8.5.1.0
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Usage
Field
Information
"Ingress IPv6..."
"seq 10..."
Example
FTOS#show ipv6 accounting access-list
!
Ingress IPv6 access list AclList1 on GigabitEthernet 9/0
Total cam count 15
!
FTOS#
926
•
•
•
•
•
• EXEC
• EXEC Privilege
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S-Series.
Introduced on the E-Series ExaScale.
Introduced on the C-Series. Increased the name string to accept up
to 140 characters. Prior to version 7.8.1.0, names are up to 16
characters long.
Introduced on the E-Series TeraScale.
Description
Displays the name of the IPv6 ACL, in this Example "AclList1".
Displays the filter. If the keywords count or byte were configured
in the filter, the number of packets or bytes processed by the filter is
displayed at the end of the line.
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 101 count (0 packets)
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
For a SONET interface, enter the keyword sonet followed by
the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.