Show Running-Config Acl; Test Cam-Usage - Dell Force10 S4810P Reference Manual

show running-config acl

Display the ACL running configuration.
C-Series, E-Series, S-Series
Syntax show running-config acl
Command Modes
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Example
FTOS#show running-config acl
!
ip access-list extended ext-acl1
!
ip access-list standard std-acl1
!
ipv6 access-list Acl1
description IPV6 Access-list
seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count
bytes
remark 10 Remark for Entry # 10
!FTOS#

test cam-usage

Verify that enough ACL CAM space is available for the IPv6 ACLs you have created.
C-Series, E-Series, S-Series
Syntax test cam-usage service-policy input input policy name linecard
{number | all}
Parameters
policy-map name
number
Defaults none
Command Modes EXEC Privilege
• EXEC
• EXEC Privilege
Introduced on the S-Series.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series TeraScale.
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 100 count
Enter the name of the policy-map to verify.
Enter all to get information for all the linecards, or enter the
linecard number to get information for a specific card. The range is
0-6 for E-Series and 0-7 for C-Series.
927