Redistribute Isis - Dell Force10 S4810P Reference Manual

route-map
name
tag
Defaults none
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.3
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
pre-Version
6.1.1.1

redistribute isis

Redistribute IS-IS routing information throughout the OSPF instance.
C-Series, E-Series, Z-Series, S4810
Syntax redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value | metric-type type-value] [route-map map-name]
[tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value | metric-type type-
value] [route-map map-name] [tag tag-value] command.
Parameters
tag
level-1
level-1-2
level-2
metric
value
metric-type
value
map-
(OPTIONAL) Enter the keywords route-map followed by the name
of the route map.
tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is 0 to 4294967295.
Introduced on the Z9000.
Introduced on the S4810.
Added Route Map for BGP Redistribution to OSPF.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Added the keyword default.
Introduced on the E-Series.
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS
Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-
IS Level-1 and Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS
Level-2 routes.
metric-
(OPTIONAL) Enter the keyword metric followed by a number. The
range is 0 (zero) to 4294967295.
type-
(OPTIONAL) Enter the keywords metric-type followed by one of
the following:
1175