Clock Read-Calendar - Dell Force10 S4810P Reference Manual

Usage
You can change the order of the month and day parameters to enter the time and date as time
Information
day month year.
In the switch, the hardware clock is separate from the software and is called the calendar.
This hardware clock runs continuously. After the hardware clock (the calendar) is set, the
FTOS automatically updates the software clock after system bootup. You cannot delete the
hardware clock (calendar).
To manually update the software with the hardware clock, use the clock read-
calendar command.
Example
FTOS#calendar set 08:55:00 june 18 2006
FTOS#
Related

clock read-calendar

Commands
clock set
clock update-calendar
show clock
clock read-calendar
Set the software clock on the switch from the information set in hardware clock (calendar).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clock read-calendar
Defaults Not configured.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
In the switch, the hardware clock is separate from the software and is called the calendar.
Information
This hardware clock runs continuously. After the hardware clock (the calendar) is set, the
FTOS automatically updates the software clock after system bootup.
You cannot delete this command (there is not a no version of this command).
1554
– sets the software clock based on the hardware clock.
– sets the software clock.
– sets the hardware clock based on the software clock.
– displays the clock settings.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.