Vlan Hello-Time - Dell Force10 S4810P Reference Manual

forward-delay
seconds
Defaults 15 seconds
Command Modes CONFIGURATION (conf-pvst)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Related
vlan bridge-priority
Commands

vlan hello-time

vlan max-age
show spanning-tree pvst
vlan hello-time
Set the time interval between generation of PVST+ 7 BPDUs.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax vlan vlan-range hello-time seconds
To return to the default value, use the no vlan hello-time command.
Parameters
vlan
hello-time
seconds
Defaults 2 seconds
Command Modes CONFIGURATION (conf-pvst)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
1298
Enter the keywords forward-delay followed by the time interval,
in seconds, that FTOS waits before transitioning PVST+ to the
forwarding state. The range is 4 to 30 seconds. The default is 15
seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
– sets the bridge-priority value.
– changes the time interval between BPDUs.
– changes the time interval before PVST+ refreshes.
– displays the PVST+ configuration.
vlan-range
Enter the keyword vlan followed by the VLAN number(s). The range
is 1 to 4094.
Enter the keywords hello-time followed by the time interval, in
seconds, between transmission of BPDUs. The range is 1 to 10
seconds. The default is 2 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.