Show Ip Pim Summary - Dell Force10 S4810P Reference Manual

PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
Timers: Uptime/Expires
* : Inherited port
(165.87.1.7, 225.1.2.1), uptime 00:00:08, expires 00:02:52,
flags: j

show ip pim summary

View information about PIM-SM operation.
C-Series, E-Series, S-Series, S4810
Syntax show ip pim summary
Command Modes
Command History
Version 8.3.12.0
Version 8.4.1.1
Version 8.1.1.0
Version 7.8.1.0
Example
FTOS#show ip pim summary
PIM TIB version 495
Uptime 22:44:52
Entries in PIM-TIB/MFC : 2/2
Active Modes :
Interface summary:
TIB summary:
1254
SGR-P - (S,G,R) Prune
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
GigabitEthernet 4/11 Upstream Port
GigabitEthernet 4/13 DR Port
GigabitEthernet 4/20 RPF 165.87.32.10 00:00:08/00:02:52
• EXEC
• EXEC Privilege
Introduced on the S4810.
Support for the display of PIM-SM snooping status was added on E-
Series ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
PIM-SNOOPING
1 active PIM interface
0 passive PIM interfaces
3 active PIM neighbors
1/1 (*,G) entries in PIM-TIB/MFC
1/1 (S,G) entries in PIM-TIB/MFC
0/0 (S,G,Rpt) entries in PIM-TIB/MFC
0 PIM nexthops
0 RPs
0 sources
0 Register states
-/-
-/-