Trust Ipv6-Diffserv - Dell Force10 S4810P Reference Manual

Example (S-
FTOS#show ipv6 route
Series)
Codes:C-connected, L-local, S-static, R-RIP,
B-BGP, IN-internal BGP, EX-external BGP,LO-Locally Originated,
O-OSPF, IA-OSPF inter area, N1-OSPF NSSA external type 1,
N2-OSPF NSSA external type 2, E1-OSPF external type 1,
E2-OSPF external type 2, i-IS-IS, L1-IS-IS level-1,
L2-IS-IS level-2, IA- IS-IS inter area, *-candidate default,
Gateway of last resort is not set
----------------------------------------------
Example
FTOS#show ipv6 route summary
(Summary)
Route Source
connected
static
Total
Total 5 active route(s) using 952 bytes

trust ipv6-diffserv

Allows the dynamic classification of IPv6 DSCP.
C-Series, E-Series, S-Series, S4810
Syntax trust ipv6-diffserv
To remove the definition, use the no trust ipv6-diffserv command.
Defaults none
Command Modes CONFIGURATION-POLICY-MAP-IN
Command History
Version 8.3.7.0
Version 8.4.2.1
Version 8.2.1.0
956
Direct, Gi 1/1, 00:28:49
C 2004::/32 [0/0]
Direct, Gi 1/1, 00:28:49
L fe80::/10 [0/0]
Direct, Nu 0, 00:29:09
Destination Dist/Metric, Gateway, Last Change
C 2001::/64 [0/0]
Direct, Gi 1/1, 00:28:49
C 2002::/120 [0/0]
Direct, Gi 1/1, 00:28:49
C 2003::/120 [0/0]
Direct, Gi 1/1, 00:28:49
C 2004::/32 [0/0]
Direct, Gi 1/1, 00:28:49
L fe80::/10 [0/0]
Direct, Nu 0, 00:29:09
Active Routes
5
0
5
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series ExaScale.
Non-active Routes
0
0
0