Reset - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

+$filesize; cmp.b $loadaddr 0xfff80000 $filesize

ethact=eTSEC1

ethaddr=00:01:E8:82:09:B2

serverip=10.11.9.4

primary_boot=f10boot tftp://10.11.9.2/si-S4810-40g

secondary_boot=f10boot flash0

default_boot=f10boot tftp://192.168.128.1/FTOS-SC-1.2.0.0E3.bin

gatewayip=10.11.192.254

ipaddr=10.11.198.114

netmask=255.255.0.0

mgmtautoneg=true

mgmtspeed100=true

mgmtfullduplex=true

stdin=serial

stdout=serial

stderr=serial

Environment size: 1002/8188 bytes

reset

Reload the S4810 system.

Command Modes

Command History

Version 8.3.7.0

You must save your changes before resetting the system or all your changes will be lost.

ethaddr=00:01:E8:82:09:B2 is the MAC address.

primary_boot=f10boot tftp://10.11.9.2/si-S4810-40g,

secondary_boot=f10boot flash0, and default_boot=f10boot

tftp://192.168.128.1/FTOS-SC-1.2.0.0E3.bin are the boot variables.

gatewayip=10.11.192.254 is the default gateway address.

ipaddr=10.11.198.114 is the management IP address.

Introduced on the S4810.