Router-Id - Dell Force10 S4810P Reference Manual

route-map
name
tag
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage IS-IS is not supported on the S-Series platforms.
Information

router-id

Use this command to configure a fixed router ID.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax router-id ip-address
To remove the fixed router ID, use the no router-id ip-address command.
Parameters
ip-address
Defaults none.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
1176
•
•
map-
(OPTIONAL) Enter the keywords route-map followed by the name
of the route map.
tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is 0 to 4294967295.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the router ID in the IP address format.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1 = for OSPF External type 1
2 = for OSPF External type 2