Parameters
mac-address-
sticky
Defaults
none
Command Modes
INTERFACE
Command History
Version 8.3.11.1
Version 8.3.12.0
Usage
If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically-
Information
learned MAC addresses are converted to sticky for that port. Any new MAC address that is
learned also becomes sticky for that port.
Related
show mac learning-limit
Commands
mac learning-limit station-move-violation
Specify the actions for a station move violation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, followed by the configured keyword.
Parameters
log
shutdown-both
shutdown-
offending
shutdown-
original
Defaults
none
Command Modes
INTERFACE (conf-if-interface-slot/port)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.8.1.0
Version 7.5.1.0
1036
Configures the dynamic MAC addresses as sticky on an interface.
Introduced on the Z9000.
Introduced on the S4810.
– Displays the details of the mac learning-limit.
Enter the keyword log to generate a syslog message on a station
move violation.
Enter the keyword shutdown to shut down both the original and
offending interface and generate a syslog message.
Enter the keywords shutdown-offending to shut down the
offending interface and generate a syslog message.
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.