byte
log
monitor
Defaults
Not configured.
Command Modes
ACCESS-LIST
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Related
deny
Commands
permit
show cam-acl
Show space allocated for IPv6 ACLs.
C-Series, E-Series, S-Series, S4810
Syntax
show cam-acl
Command Modes
Command History
Version 8.3.7.0
Version 8.4.2.1
Version 8.4.2.0
Version 7.8.1.0
Example
FTOS#show cam-acl
-- Chassis Cam ACL --
L2Acl
Ipv4Acl :
Ipv6Acl :
Ipv4Qos :
L2Qos
-- Line card 4 --
(OPTIONAL) Enter the keyword byte to count bytes processed by
the filter.
(OPTIONAL) Enter the keyword log to enter ACL matches in the log.
Supported on Jumbo-enabled line cards only.
(OPTIONAL) Enter the keyword monitor to monitor traffic on the
monitoring interface specified in the flow-based monitoring session
along with the filter operation.
Introduced on the E-Series TeraScale and S-Series.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Added the monitor option.
– configures a filter to drop packets.
– configures a filter to forward packets.
•
EXEC
•
EXEC Privilege
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the E-Series TeraScale.
Introduced on the C-Series.
Current Settings(in block sizes)
:
5
6
0
1
:
1
923