Ip Ssh Rhostsfile - Dell Force10 S4810P Reference Manual

Example
FTOS#conf
FTOS(conf)# ip ssh pub-key-file flash://knownhosts
FTOS(conf)#
Related show ip ssh client-pub-keys
Commands authentication.

ip ssh rhostsfile

Specify the rhost file to be used for host-based authorization.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ssh rhostsfile {WORD}
Parameters
WORD
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Example
FTOS#conf
FTOS(conf)# ip ssh rhostsfile flash://shosts
FTOS(conf)#
Usage
This command specifies the rhost file to be used for host-based authentication. This
Information
creates/ file overwrites the flash:/ADMIN_DIR/ssh/shosts file and deletes the
user-specified file. Even though this is a global configuration command, it does not appear in
the running configuration because this command needs to be run just once.
This file contains hostnames and usernames, for which hosts and users, rhost-authentication
can be allowed.
1448
NOTE: For rhostfile and pub-key-file, the administrator must FTP the file to the
chassis.
– displays the client-public keys used for the host-based
Enter the rhost file name for the host-based authentication.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
NOTE: For rhostfile and pub-key-file, the administrator must FTP the file to the
switch.