Default-Information Originate - Dell Force10 S4810P Reference Manual

07:21:40 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40,
Router ID:223.255.255.254, Area ID:0, Chksum:af8f, Inst:0,
from Te 0/36
FTOS#
debug ipv6 ospf
Field
Output Fields
OSPFv3...
05:21:01
Sending Ver:3
type:
Length:
Router ID:
Area ID:
Chksum:

default-information originate

Configure the FTOS to generate a default external route into an OSPFv3 routing domain.
C-Series, E-Series, Z-Series, S4810
Syntax default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always
metric
value
metric-type
value
Description
Debugging is on for all OSPFv3 packets and all interfaces.
Displays the time stamp.
Sending OSPF3 version..
Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
• 7 - external LSA
• 8 - link-state advertisement (OSPFv3)
• 9 - link local LSA (OSPFv2), Intra-Area-Prefix LSA (OSPFv3)
• 11 - grace LSA (OSPFv3)
Displays the packet length.
Displays the OSPF3 router ID.
Displays the Area ID.
Displays the OSPF3 checksum.
(OPTIONAL) Enter the keyword always to specify that default route
information must always be advertised.
metric-
(OPTIONAL) Enter the keyword metric followed by a number to
configure a metric value for the route. The range is 1 to 16777214.
type-
(OPTIONAL) Enter the keywords metric-type followed by an
OSPFv3 link state type of 1 or 2 for default routes. The values are:
1215