Match Mac Dot1P - Dell Force10 S4810P Reference Manual

Defaults none
Command Modes CLASS-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.5.1.0
pre-Version
7.4.1.0
Usage You must enter the class-map command in order to access this command. After the class
Information map is identified, you can configure the match criteria.
Related class-map
Commands

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax match mac dot1p {dot1p-list}
Parameters
dot1p-list
Defaults none
Command Modes CLASS-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.5.1.0
pre-Version
7.4.1.0
Usage You must enter the class-map command in order to access this command. After the class
Information
map is identified, you can configure the match criteria.
Related class-map
Commands
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.
Introduced.
– identifies the class map.
Enter a dot1p value. The range is 0 to 7.
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.
Introduced.
– identifies the class map.
1319