Show Spanning-Tree Msti - Dell Force10 S4810P Reference Manual

show spanning-tree msti

View the multiple spanning tree instance.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show spanning-tree msti [instance-number [brief]] [guard]
Parameters
instance-number
brief
guard
Command Modes
Command History
Version 8.3.11.1
Version 8.4.2.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.4.1.0
Usage You must enable the multiple spanning tree protocol prior to using this command.
Information
Example
FTOS#show spanning-tree msti 10
MSTI 10 VLANs mapped 101-105
Bridge Identifier has priority 32768, Address 0001.e802.3506
Configured hello time 2, max age 20, forward delay 15, max
hops 5
Current root has priority 16384, Address 0001.e800.0a5c
Number of topology changes 0, last change occurred 3058087
Port 82 (GigabitEthernet 2/0) is designated Forwarding
Port path cost 0, Port priority 128, Port Identifier 128.82
Designated root has priority 16384, address 0001.e800.0a:5c
Designated bridge has priority 32768, address 0001.e802.35:06
Designated port id is 128.82, designated path cost
Number of transitions to forwarding state 1
BPDU (Mrecords): sent 1109, received 0
The port is not in the portfast mode
Port 88 (GigabitEthernet 2/6) is root Forwarding
1110
(Optional) Enter the multiple spanning tree instance number. The
range is 0 to 63.
(Optional) Enter the keyword brief to view a synopsis of the MST
instance.
(Optional) Enter the keyword guard to display the type of guard
enabled on an MSTP interface and the current port state.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Support for the optional keyword guard was added on the C-Series,
S-Series, and E-Series TeraScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded to display the port error disable state (EDS) caused by
loopback BPDU inconsistency.