Ipv6 Nd Max-Ra-Interval; Ipv6 Nd Mtu - Dell Force10 S4810P Reference Manual

ipv6 nd max-ra-interval

Configure the interval between the IPv6 router advertisement (RA) transmissions on an interface.
E-Series
Syntax ipv6 nd max-ra-interval {interval} min-ra-interval {interval}
To restore the default interval, use the no ipv6 nd max-ra-interval command.
Parameters
max-ra-interval
interval }
{
min-ra-interval
interval }
{
Defaults
Command Modes INTERFACE

ipv6 nd mtu

Configure an IPv6 neighbor discovery.
C-Series, E-Series, S-Series
Syntax ipv6 nd mtu number
Parameters
mtu
Defaults none
Command Modes INTERFACE
Command History
Version 8.3.1.0
Usage
The ip nd mtu command sets the value advertised to routers. It does not set the actual
Information
MTU rate. For example, if ip nd mtu is set to 1280, the interface still passes 1500-byte
packets.
The mtu command sets the actual frame size passed and can be larger than the advertised
MTU. If the mtu setting is larger than the ip nd mtu command, an error message is sent, but
the configuration is accepted. The error message is: % Error: nd ra mtu is
greater than link mtu, link mtu will be used.
Enter the keywords max-ra-interval followed by the interval in
seconds. The range is 4 to 1800 seconds.
Enter the keywords min-ra-interval followed by the interval in
seconds. The range is 3 to 1350 seconds.
• Max RA interval: 600 seconds
• Min RA interval: 200 seconds
number Set the MTU advertisement value in Routing Prefix Advertisement
packets. The range is 1280 to 9234.
Introduced
1135