Dell Force10 S4810P Reference Manual page 875

Version 7.9.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage The following describes the show ip cam command shown in the Example below.
Information
Field
Index
Destination
EC
CG
V
C
Next-Hop
VId
Mac Addr
Port
Example
FTOS#show ip cam linecard 13 port-set 0
Index
------ ----------------------------------- ---- -------------
3276
3277
3278
3279
3280
11144
11145
11146
11147
11148
65535
FTOS#
Introduced VRF on the E-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the CAM index number of the entry.
Displays the destination route of the index.
Displays the number of equal cost multipaths (ECMP) available for
the default route for non-Jumbo line cards. For Jumbo line cards,
displays 0,1 when ECMP is more than eight.
Displays 0.
Displays a 1 if the entry is valid and a 0 if the entry is for a line card
with Catalog number beginning with LC-EF.
Displays the CPU bit. 1 indicates that a packet hitting this entry is
forwarded to the CP or RP2, depending on Egress port.
Displays the next hop IP address of the entry.
Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN.
Displays the next-hop router's MAC address.
Displays the egress interface. Use the second half of the entry to
determine the interface. For example, in the entry 17cl CP, the CP is
the pertinent portion.
• CP = control processor
• RP2 = route processor 2
• Gi = Gigabit Ethernet interface
• So = SONET interface
• Te = 10 Gigabit Ethernet interface
Destination EC CG V C
6.6.6.2 0 0 1 1
5.5.5.2 0 0 1 1
4.4.4.2 0 0 1 1
3.3.3.2 0 0 1 1
2.2.2.2 0 0 1 1
6.6.6.0 0 0 1 1
5.5.5.0 0 0 1 1
4.4.4.0 0 0 1 1
3.3.3.0 0 0 1 1
2.2.2.0 0 0 1 1
0.0.0.0 0 0 1 1
Next-Hop VId Mac-Addr
0.0.0.0 0 00:00:00:00:00:00 17c1 CP
0.0.0.0 0 00:00:00:00:00:00 17c1 CP
0.0.0.0 0 00:00:00:00:00:00 17c1 CP
0.0.0.0 0 00:00:00:00:00:00 17c1 CP
0.0.0.0 0 00:00:00:00:00:00 17c1 CP
0.0.0.0 6 00:00:00:00:00:00 17c5 RP2
0.0.0.0 5 00:00:00:00:00:00 17c5 RP2
0.0.0.0 4 00:00:00:00:00:00 17c5 RP2
0.0.0.0 3 00:00:00:00:00:00 17c5 RP2
0.0.0.0 2 00:00:00:00:00:00 17c5 RP2
0.0.0.0 0 00:00:00:00:00:00 17c5 RP2
Port
875