Related
disable
Commands
show config
View the current configuration for the mode. Only non-default values are displayed.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes
CONFIGURATION RSTP (conf-rstp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Example
FTOS(conf-rstp)#show config
!
protocol spanning-tree rstp
show spanning-tree rstp
Display the RSTP configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show spanning-tree rstp [brief] [guard]
Parameters
brief
guard
Command Modes
– disables RSTP globally on the system.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no disable
bridge-priority 16384
(OPTIONAL) Enter the keyword brief to view a synopsis of the
RSTP configuration information.
(OPTIONAL) Enter the keyword guard to display the type of guard
enabled on an RSTP interface and the current port state.
•
EXEC
•
EXEC Privilege
1397