Dell Force10 S4810P Reference Manual page 1193

Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the show ip ospf process-id database router
Information
command shown in the Example below.
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Number of Links
Link connected to:
(Link ID)
(Link Data)
Number of TOS
Metric
TOS 0 Metric
Example
FTOS#show ip ospf 100 database router
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA age.
Displays the optional capabilities available on router. The following
options can be found in this item:
• TOS-capability or No TOS-capability is displayed depending
on whether the router can support Type of Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand circuits.
• E or No E is displayed on whether the originating router can
accept AS External LSAs.
Displays the LSA type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Displays the link state sequence number. This number detects
duplicate or old LSAs.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the number of active links to the type of router (Area Border
Router or AS Boundary Router) listed in the previous line.
Identifies the type of network to which the router is connected.
Identifies the link type and address.
Identifies the router interface address.
Lists the number of TOS metrics.
Lists the number of TOS 0 metrics.
OSPF Router with ID (1.1.1.10) (Process ID 100)
Router (Area 0)
1193