Timeout Login Response; Username - Dell Force10 S4810P Reference Manual

Related

username

Commands

timeout login response

Specify how long the software waits for the login input (for example, the user name and password) before timing out.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
seconds
Defaults See above.
Command Modes LINE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage The software measures the period of inactivity defined in this command as the period between
Information consecutive keystrokes. For example, if your password is "password" you can enter "p" and
wait 29 seconds to enter the next letter.
username
Establish an authentication system based on user names.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax username name [access-class access-list-name] [nopassword |
{password | secret} [encryption-type] password] [privilege
level]
If you do not want a specific user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
1422
– enables a user.
Enter a number of seconds the software waits before logging you out.
The range is:
• VTY: 1 to 30 seconds, the default is 30 seconds.
• Console: 1 to 300 seconds, the default is 0 seconds (no
timeout).
• AUX: 1 to 300 seconds, the default is 0 seconds (no timeout).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.