Match Mac Vlan; Policy-Aggregate - Dell Force10 S4810P Reference Manual

match mac vlan

Configure a match criterion for a class map based on VLAN ID.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax match mac vlan number
Parameters
number
Defaults none
Command Modes CLASS-MAP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Usage You must enter the class-map command in order to access this command. You can match
Information
against only one VLAN ID.
Related class-map
Commands

policy-aggregate

Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS policy is part of the policy
map (input/output) applied on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax policy-aggregate qos-policy-name
To remove a policy aggregate configuration, use the no policy-aggregate qos-
policy-name command.
Parameters
qos-policy-name
Defaults none
Command Modes CONFIGURATION (policy-map-input and policy-map-output)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0
1320
Enter the VLAN ID. The range is 1 to 4094.
Introduced on the Z9000.
Introduced on the S4810.
Introduced.
– identifies the class map.
Enter the name of the policy map in character format (32 characters
maximum).
Introduced on the Z9000.
Introduced on the S4810.
Policy name character limit increased from 16 to 32.
Introduced on the S-Series.
Introduced on the C-Series.