Trust - Dell Force10 S4810P Reference Manual

Pre-Defined WRED Profile Name
wred_drop
wred_ge_y
wred_ge_g
wred_teng_y
wred_teng_g
Related wred-profile
Commands

trust

Specify dynamic classification (DSCP) or dot1p to trust.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax trust {diffserv [fallback]| dot1p [fallback]| ipv6-diffserv}
Parameters
diffserv
dot1p
fallback
ipv6-diffserv
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
pre-Version
6.1.1.1
Usage
When you configure trust, matched bytes/packets counters are not incremented in the
Information
show qos statistics command.
– creates a WRED profile.
Enter the keyword diffserv to specify trust of DSCP markings.
Enter the keyword dot1p to specify trust dot1p configuration.
Enter the keyword fallback to classify packets according to their
DSCP value as a secondary option in case no match occurs against
the configured class maps.
On E-Series only, enter the keyword ipv6-diffserv to specify
trust configuration of IPv6 DSCP.
Introduced on the Z9000.
Introduced on the S4810.
Added fallback to the E-Series.
Added dot1p to the C-Series and S-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Added dot1p and IPv6 DSCP.
Introduced on the E-Series
Minimum Threshold
0
1024
2048
4096
8192
Maximum Threshold
0
2048
4096
8192
16384
1349