Dell Force10 S4810P Reference Manual page 1310

Usage The following describes the show interfaces rate police command shown in the
Information
Example below.
Field
Rate policce
peak
Traffic monitor 0
Normal
peak
Out of profile Yellow
Out of profile Red
Traffic monitor 1
Traffic monitor 2
Traffic monitor 3
Traffic monitor 4
Traffic monitor 5
Traffic monitor 6
Traffic monitor 7
Total: yellow
Total: red
Example (Rate
FTOS#show interfaces gigabitEthernet 1/2 rate police
Police)
1310
Out of profile yellow 0 red 0
Traffic Monitor 3: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 4: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 5: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 6: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 7: normal NA peak NA
Out of profile yellow 0 red 0
Total: yellow 23386960 red 320605113
Description
Committed rate (Mbps) and burst size (KB) of the committed rate.
Peak rate (Mbps) and burst size (KB) of the peak rate.
Traffic coming to class 0.
Committed rate (Mbps) and burst size (KB) of the committed rate.
Peak rate (Mbps) and burst size (KB) of the peak rate.
Number of packets that have exceeded the configured committed
rate.
Number of packets that have exceeded the configured peak rate.
Traffic coming to class 1.
Traffic coming to class 2.
Traffic coming to class 3.
Traffic coming to class 4.
Traffic coming to class 5.
Traffic coming to class 6.
Traffic coming to class 7.
Total number of packets that have exceeded the configured
committed rate.
Total number of packets that have exceeded the configured peak
rate.
Rate police 300 (50) peak 800 (50)
Traffic Monitor 0: normal 300 (50) peak 800 (50)
Out of profile yellow 23386960 red 320605113
Traffic Monitor 1: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 2: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 3: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 4: normal NA peak NA