Dell Force10 S4810P Reference Manual page 848

Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.3.1.0
Usage The following describes the debug ip packet command in the Example below.
Information
Field
s=
d=
len
sending, rcvd,
fragment, sending
broad/multicast
proto, unroutable
TCP src=
UDP src=
ICMP type=
IP Fragment
Example
IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 54, sending
win=8191 ACK PUSH
IP: s=10.1.2.206 (Ma 0/0), d=10.1.2.62, len 40, rcvd
IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 226,
sending
win=8192 ACK PUSH
IP: s=10.1.2.216 (Ma 0/0), d=10.1.2.255, len 78, rcvd
IP: s=10.1.2.62 (local), d=10.1.2.3 (Ma 0/0), len 1500,
sending fragment
848
Introduced on the S4810.
Added support for 4094 VLANs on the E-Series ExaScale (the prior
limit was 2094).
Introduced on the E-Series ExaScale.
Added the access-group option.
Introduced on the S-Series.
Introduced on the C-Series.
Added the count option.
Description
Lists the source address of the packet and the name of the interface
(in parentheses) that received the packet.
Lists the destination address of the packet and the name of the
interface (in parentheses) through which the packet is being sent out
on the network.
Displays the packet's length.
The last part of each line lists the status of the packet.
Displays the source and destination ports, the sequence number, the
acknowledgement number, and the window size of the packets in
that TCP packets.
Displays the source and destination ports for the UDP packets.
Displays the ICMP type and code.
States that it is a fragment and displays the unique number
identifying the fragment (Ident) and the offset (in 8-byte units) of this
fragment (fragment offset) from the beginning of the original
datagram.
TCP src=23, dst=40869, seq=2112994894, ack=606901739,
TCP src=0, dst=0, seq=0, ack=0, win=0
TCP src=23, dst=40869, seq=2112994896, ack=606901739,
UDP src=0, dst=0
IP Fragment, Ident = 4741, fragment offset = 0
ICMP type=0, code=0