Dell Force10 S4810P Reference Manual page 1072

Parameters
interface
all
events
packet
brief
detail
tx
rx
both
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
1072
Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/ port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
NOTE: The FastEthernet option is not supported on the S-
Series.
(OPTIONAL) Enter the keyword all to display information on all
interfaces.
(OPTIONAL) Enter the keyword events to display major events such
as timer events.
(OPTIONAL) Enter the keyword packet to display information
regarding packets coming in or going out.
(OPTIONAL) Enter the keyword brief to display brief packet
information.
(OPTIONAL) Enter the keyword detail to display detailed packet
information.
(OPTIONAL) Enter the keyword tx to display transmit only packet
information.
(OPTIONAL) Enter the keyword rx to display receive only packet
information.
(OPTIONAL) Enter the keyword both to display both receive and
transmit packet information.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.