Ntp Update-Calendar; Show Calendar - Dell Force10 S4810P Reference Manual

ntp update-calendar

Configure the FTOS to update the calendar (the hardware clock) with the NTP-derived time.
C-Series, E-Series, S-Series, Z-Series
Syntax ntp update-calendar [minutes]
To return to default setting, use the no ntp update-calendar command.
Parameters
minutes
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0

show calendar

Display the current date and time based on the switch hardware clock.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show calendar
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
(OPTIONAL) Enter the number of minutes between updates from NTP
to the hardware clock. The range is 1 to 1440. The default is 60
minutes.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1567