Version - Dell Force10 S4810P Reference Manual

version

Specify either RIP version 1 or RIP version 2.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax version {1 | 2}
To return to the default version setting, use the no version command.
Parameters
1
2
Defaults The FTOS sends RIPv1 and receives RIPv1 and RIPv2.
Command Modes ROUTER RIP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Related
ip rip receive version
Commands
ip rip send version
Enter the keyword 1 to specify RIP version 1.
Enter the keyword 2 to specify RIP version 2.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– sets the RIP version to be received on the interface.
– sets the RIP version to be sent out the interface.
1375