Show Mac Learning-Limit - Dell Force10 S4810P Reference Manual

Field
MAC FIB Entries
MAC ACL Entries
Example
FTOS#show mac cam
Slot Type
11
Note: All CAM entries are per portpipe.
FTOS#
Related show mac-address-table
Commands

show mac learning-limit

Display MAC address learning limits set for various interfaces.
C-Series, E-Series, Z-Series, S4810
Syntax show mac learning-limit [violate-action] [detail] [interface
interface [vlan vlan-id]]
Parameters
violate-action
detail
interface
interface
Description
Displays the amount and percentage of CAM available for MAC
addresses.
Displays the amount and percentage of CAM available for MAC
ACLs.
MAC CAM Size
0 E24PD 64K entries
2 E24PD2 128K entries
EX2YD 64K entries
– displays the current MAC address configuration.
(OPTIONALY) Enter the keywords violate-action to display the
MAC learning limit violation status.
(OPTIONAL) Enter the keyword detail to display the MAC learning
limit in detail.
(OPTIONAL) Enter the keyword interface with the following
keywords and slot/port or number information:
•
•
•
•
•
NOTE: A portion of the MAC CAM is used for system operations;
therefore, adding the MAC FIB and MAC ACL is less than the
MAC CAM.
MAC FIB Entries
48K (75%)
64K (50%)
16K (25%)
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For SONET interfaces, enter the keyword sonet followed by
the slot/ port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series, the range
is 1 to 128. For the E-Series, the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
MAC ACL Entries
8K (25%)
32K (50%)
24K (75%)
1047