Match Ipv6 Route-Source - Dell Force10 S4810P Reference Manual

To delete a match, use the no match ipv6 next-hop prefix-list prefix-
list-name command.
Parameters
prefix-list
list-name
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Related
match ipv6 address
Commands

match ipv6 route-source

match ipv6 route-source
Configure a filter which matches based on the routes advertised in the IPv6 prefix lists.
C-Series, E-Series, S-Series
Syntax match ipv6 route-source prefix-list prefix-list-name
To delete a match, use the no match ipv6 route-source prefix-list
prefix-list-name command.
Parameters
prefix-list
list-name
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Related
match ipv6 address
Commands
match ipv6 next-hop
930
prefix-
Enter the keywords prefix-list followed by the name of
configured prefix list, up to 140 characters.
Introduced on the S-Series.
Introduced on the E-Series ExaScale.
Introduced on the C-Series. Increased the name string to accept up
to 140 characters. Prior to version 7.8.1.0, the names are up to 16
characters long.
Introduced on the E-Series TeraScale.
– redistributes routes that match an IP address.
– redistributes routes that match routes advertised by other routers.
prefix-
Enter the keywords prefix-list followed by the name of
configured prefix list, up to 140 characters.
Introduced on the S-Series.
Introduced on the E-Series ExaScale.
Introduced on the C-Series. Increased the name string to accept up
to 140 characters. Prior to version 7.8.1.0, the names are up to 16
characters long.
Introduced on the E-Series TeraScale.
– redistributes routes that match an IP address.
– redistributes routes that match the next-hop IP address.