Ip Domain-List - Dell Force10 S4810P Reference Manual

Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0

ip domain-list

Configure names to complete unqualified host names.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip domain-list name
To remove the name, use the no ip domain-list name command.
Parameters
name
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Usage Configure the ip domain-list command up to six times to configure a list of possible
Information domain names.
If you configure both the ip domain-name and ip domain-list commands, the
software tries to resolve the name using the ip domain-name command. If the name is not
resolved, the software goes through the list of names configured with the ip domain-list
command to find a match.
Use the following steps to enable dynamic resolution of hosts:
To view current bindings, use the show hosts command. To view DNS related
configuration, use the show running-config resolve command.
Related ip domain-name
Commands
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Enter a domain name to be used to complete unqualified names (that
is, incomplete domain names that cannot be resolved).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
• specify a domain name server with the ip name-server command
• enable DNS with the ip domain-lookup command
– specifies a DNS server.
851