Show Config; Show Ipv6 Accounting Access-List - Dell Force10 S4810P Reference Manual

Ipv6Acl :
-- Stack unit 0 --
L2Acl
Ipv4Acl :
Ipv6Acl :
FTOS#show cam-acl
Related cam-acl
Commands

show config

View the current IPv6 ACL configuration.
C-Series, E-Series, S-Series
Syntax show config
Command Modes ACCESS-LIST
Command History
Version 8.4.2.1
Version 8.4.2.0
Version 8.2.1.0
Version 7.8.1.0
Example
FTOS(conf-ipv6-acl)#show config
!
ipv6 access-list Acl1
bytes
FTOS(conf-ipv6-acl)#

show ipv6 accounting access-list

View the IPv6 access-lists created on the E-Series and the sequence of filters.
C-Series, E-Series, S-Series
Syntax show ipv6 accounting {access-list access-list-name | cam_count}
interface interface
Parameters
access-list-name
cam_count
interface
interface
2
Current Settings(in block sizes)
: 1
1
2
– configures CAM profiles to support IPv6 ACLs.
Introduced on the S-Series.
Introduced on the E-Series TeraScale.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 100 count
Enter the name of the ACL to be displayed, up to 140 characters.
List the count of the CAM rules for this ACL.
Enter the keyword interface followed by the interface type and
slot/port or number information:
925