Show Ip Ospf Timers Rate-Limit - Dell Force10 S4810P Reference Manual

Example
FTOS#show ip ospf 100 statistics
(Statistics)
Interface GigabitEthernet 0/8
Intf-Down
Wrong-Len
Auth-Error 0
Version
SeqNo-Err
RX
TX
Related clear ip ospf statistics
Commands

show ip ospf timers rate-limit

Show the LSA currently in the queue waiting for timers to expire.
Z-Series, S4810
Syntax show ip ospf process-id timers rate-limit
Parameters
process-id
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.3.8.0
Example
FTOS#show ip ospf 10 timers rate-limit
List of LSAs in rate limit Queue
LSA id: 1.1.1.0 Type: 3 Adv Rtid: 3.3.3.3 Expiry time:
1204
• Transmit timer remaining value for each neighbor
• The LSU Q length and its highest mark for each neighbor
• The LSR Q length and its highest mark for each neighbor
Hello-Timer 9, Wait-Timer 0, Grace-Timer 0
Error packets (Only for RX)
0 Non-Dr
0 Invld-Nbr
MD5-Error
0 AreaMisMatch 0
0 Unkown-Pkt
Neighbor ID 9.1.1.2
Hello DDiscr LSReq LSUpd LSAck
59 3 1
62 2 1
Dead-Timer 37, Transmit-Timer
LSU-Q-Len 0, LSU-Q-Wmark
LSR-Q-Len 0, LSR-Q-Wmark
– clears the packet statistics in all interfaces and neighbors.
Enter the OSPF Process ID to show a specific process. If no Process
ID is entered, command applies only to the first OSPF process.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
0 Self-Org
0 Nbr-State
0 Cksum-Err
Conf-Issue
0
1 1
0 0
0
0
1
0
0
0
0