Ip Ssh Pub-Key-File - Dell Force10 S4810P Reference Manual

Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage With password authentication enabled, you can authenticate using the local, RADIUS, or
Information TACACS+ password fallback order as configured.

ip ssh pub-key-file

Specify the file to be used for host-based authentication.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ssh pub-key-file {WORD}
Parameters
WORD
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
This command specifies the file to be used for the host-based authentication. The creates/
Information
file overwrites the flash://ADMIN_DIR/ssh/knownhosts file and deletes the user-
specified file. Even though this is a global configuration command, it does not appear in the
running configuration because this command needs to be run just once.
The file contains the OpenSSH-compatible public keys of the host for which host-based
authentication is allowed. An example known host file format:
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui
+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t
ReG1o8AxLi6+S4hyEMqHzkzBFNVqHzpQc
+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEn WIMPJi0ds=
ashwani@poclab4
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the file name for the host-based authentication.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1447